EasyManuals Logo

Epson VS210 User Manual

Epson VS210
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Projection Modes
Depending on how you positioned the projector, you may need to change the projection mode so your
images project correctly.
Front (default setting) lets you project from a table in front of the screen.
Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
Rear flips the image horizontally to project from behind a translucent screen.
Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and behind
a translucent screen.
You can change the projection mode using the remote control or by changing a menu setting.
Changing the Projection Mode Using the Remote Control
Changing the Projection Mode Using the Menus
Parent topic: Using Basic Projector Features
Changing the Projection Mode Using the Remote Control
You can change the projection mode to flip the image over top-to-bottom.
1. Turn on the projector and display an image.
2. Hold down the A/V Mute button on the remote control for five seconds.
The image disappears briefly and reappears flipped top-to-bottom.
3. To change projection back to the original mode, hold down the A/V Mute button for five seconds
again.
Parent topic: Projection Modes
Changing the Projection Mode Using the Menus
You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the
projector menus.
46

Table of Contents

Other manuals for Epson VS210

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson VS210 and is the answer not in the manual?

Epson VS210 Specifications

General IconGeneral
Number of colors16.78 million colors
Projection distance0.87 - 10.5 m
Projection technologyLCD
Contrast ratio (typical)3000:1
Screen size compatibility23 - 350 \
Projector native resolutionSVGA (800x600)
Keystone correction, vertical±30 °
Aspect ratio4:3
RS-232 ports-
Dimensions (WxDxH)294.6 x 228.6 x 78.7 mm
Horizontal resolution560 lines
Connectivity technologyWired
FocusManual
Throw ratio1.45 - 1.96:1
Digital zoom1.35 x
Zoom capabilityYes
Focal length range- mm
Objective focal length16.7 mm
Lamp typeUHE
Lamp power200 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-B
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity1
Ethernet LAN (RJ-45) ports0
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions1280 x 960, 1024 x 768 (XGA), 1152 x 864 (XGA+), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
RMS rated power1 W
Product colorBlack, White
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)- W
Power consumption (typical)283 W
Power consumption (PowerSave)234 W
Noise level37 dB
Noise level (economic mode)29 dB
Operating temperature (T-T)5 - 35 °C
Cables includedVGA
Weight and Dimensions IconWeight and Dimensions
Depth228.6 mm
Width294.6 mm
Height78.7 mm
Weight2300 g

Related product manuals