EasyManuals Logo

Epson VS210 User Manual

Epson VS210
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the
lens. Do not spray any liquid directly on the lens.
Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the
projector lamp may cause a fire.
Caution: Do not use glass cleaner to clean the lens, or you may damage it. Do not use canned air, or
the gases may leave a residue. Avoid touching the lens with your bare hands to prevent fingerprints on
or damage to the lens surface.
Parent topic: Projector Maintenance
Cleaning the Projector Case
Before cleaning the projector case, turn off the projector and unplug the power cord.
To remove dust or dirt, use a soft, dry, lint-free cloth.
To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid
directly on the projector.
Caution: Do not use wax, alcohol, benzene, paint thinner, or other chemicals to clean the projector
case. These can damage the case. Do not use canned air, or the gases may leave a residue.
Parent topic: Projector Maintenance
Air Filter and Vent Maintenance
The projector's air filter keeps the intake air clean, and its vents expel the exhaust. If dust collects on the
air filter or vents, clean them as described in this manual. Dust clogs may cause the projector to overheat
due to improper ventilation.
Be sure to clean the air filter and vents if you see a message telling you to do so. Also make sure nothing
blocks the vents.
Cleaning the Air Filter and Vents
Replacing the Air Filter
Parent topic: Projector Maintenance
Cleaning the Air Filter and Vents
Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.
1. Turn off the projector and unplug the power cord.
77

Table of Contents

Other manuals for Epson VS210

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson VS210 and is the answer not in the manual?

Epson VS210 Specifications

General IconGeneral
Number of colors16.78 million colors
Projection distance0.87 - 10.5 m
Projection technologyLCD
Contrast ratio (typical)3000:1
Screen size compatibility23 - 350 \
Projector native resolutionSVGA (800x600)
Keystone correction, vertical±30 °
Aspect ratio4:3
RS-232 ports-
Dimensions (WxDxH)294.6 x 228.6 x 78.7 mm
Horizontal resolution560 lines
Connectivity technologyWired
FocusManual
Throw ratio1.45 - 1.96:1
Digital zoom1.35 x
Zoom capabilityYes
Focal length range- mm
Objective focal length16.7 mm
Lamp typeUHE
Lamp power200 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-B
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity1
Ethernet LAN (RJ-45) ports0
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions1280 x 960, 1024 x 768 (XGA), 1152 x 864 (XGA+), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
RMS rated power1 W
Product colorBlack, White
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)- W
Power consumption (typical)283 W
Power consumption (PowerSave)234 W
Noise level37 dB
Noise level (economic mode)29 dB
Operating temperature (T-T)5 - 35 °C
Cables includedVGA
Weight and Dimensions IconWeight and Dimensions
Depth228.6 mm
Width294.6 mm
Height78.7 mm
Weight2300 g

Related product manuals