Epson WF-2110 Series - Continue Printing Temporarily Without Replacing Ink Cartridges

7. Insert the new ink cartridge, and then press it down rmly.
8. Close the printer cover.
9. Press the + button.
Ink charging starts.
c
Important:
Aer installing the ink cartridge, the power and ink light will continues to ash while the printer is charging
ink. Do not turn o the printer during ink charging. Charging takes approximately two minutes. If the ink
charging is incomplete, you may not be able to print.
Note:
If the
B light does not turn o, try removing and reinserting the ink cartridge.
Related Information
& “Ink Cartridge Handling Precautions” on page 107
Continue Printing Temporarily without Replacing Ink Cartridges
Temporarily Printing with Black Ink
When color ink is expended and black ink still remains, you can use the following settings to continue printing for
a short time using only black ink.
❏ Type of paper: plain papers, Envelope
Solving Problems > It is Time to Replace the Ink Cartridges > Continue Printing Temporarily without Replacing In …
116