Checking Lights and Printer Status
Lights on the control panel indicates the status of the printer.
Normal Status
: On : On
Light Status
The printer is connected to a wireless (Wi-Fi) network or Ethernet
If the printer is connected to Wi-Fi and a wired LAN at the same time, the
wired LAN connection takes priority.
The printer is connected to a network in Wi-Fi Direct (Simple AP) mode.
The printer is connected by USB.
Error Status
When an error occurs, the light turns on or ashes. Details of the error are displayed on the computer screen.
: On
: Flashing slowly
/ : Flashing fast
Light Status Solutions
Wi-Fi connection error has occurred. Press the button to clear the error and try again.
No paper is loaded or more than one sheet
has been fed at a time.
Load paper and press the
+
button.
A paper jam has occurred.
Remove the paper and press the
+
button.
Guide to the Control Panel
>
Checking Lights and Printer Status
20
To Next Page
Loading...
