Epson WF-2110 Series - Page 51

c
Important:
❏ Do not open the front cover or turn
o
the printer during head cleaning. If the head cleaning is incomplete, you
may not be able to print.
❏ Head cleaning consumes ink and should not be performed more than necessary.
❏ When ink is low, you may not be able to clean the print head.
❏ If print quality has not improved aer repeating nozzle check and head cleaning 4 times, wait for at least 6 hours
without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We recommend
turning o the printer by using the
P button. If print quality has still not improved, run Power Cleaning.
❏ To prevent the print head from drying out, do not unplug the printer while the power is on.
You can check and clean the print head by using the printer's control panel.
1. Load A4-size plain paper in the printer.
2. Press the
P button to turn o the printer.
3. Turn the printer on while holding the
+ button down, and then release the buttons when the power light
ashes.
e nozzle check pattern is printed.
Note:
It may take some time to start printing the nozzle check pattern.
4. Check the printed pattern to see if the print head nozzles are clogged.
Maintaining the Printer > Improving Print Quality > Checking and Cleaning the Print Head
51