The installation location is inappropriate.
Solutions
Place the printer on a at surface and operate in the recommended environmental conditions.
& “Environmental Specications” on page 136
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
& “Available Paper and Capacities” on page 126
& “Unavailable Paper Types” on page 128
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
& “Paper Handling Precautions” on page 25
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specied for the paper.
& “Available Paper and Capacities” on page 126
Paper Feeds at a Slant
e following causes can be considered.
The paper is curled.
Solutions
If the paper is curled or the edges of the paper are folded, it may touch the print head and be fed at an
angle.
Place the paper on a at surface to check if it is curled. If it is, atten it.
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
& “Loading Paper in the Rear Paper Feeder” on page 26
Several Sheets of Paper are Fed at a Time
e
following causes can be considered.
Solving Problems
>
Cannot Print
>
Paper Does Not Feed Properly
91
To Next Page
Loading...
