Epson WF-2540 - Running a Product Check

Related references
Paper Jam Problems
Document Jams in the Automatic Document Feeder
Where to Get Help
Related tasks
Connecting a Telephone or Answering Machine
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load a few sheets of plain paper in the product.
3. Press the Menu button.
4. Press the up or down arrow buttons to select Maintenance and press the OK button.
You see this screen:
5. Press the up or down arrow buttons to select Nozzle Check and press the OK button.
6. Press one of the Start buttons.
After the nozzle pattern prints, you see this screen:
225