Epson WF-2651 - Saving Received Faxes

Receiving Faxes by Polling (Polling Receive)
You can receive a fax stored on another fax machine for fax polling by dialing the fax number. You can receive a
specic document from a fax information service by following the audio guidance of the service.
Note:
When you follow the audio guidance, dial the fax number using the connected telephone.
1. Enter Fax from the home screen.
2. Press the OK button, and then enable Polling Receive.
3. Enter the fax number.
4. Press the
x button.
Related Information
& “Sending Faxes Dialing from the External Phone Device” on page 70
Saving Received Faxes
You can set to save received faxes to a computer. If you do not make the setting, received documents are printed
automatically.
Note:
When the computer is not turned on, the printer temporarily saves the received documents in its memory. If the memory
becomes full, the printer cannot send or receive faxes.
1. Using FAX Utility on the computer connected to the printer, set to save received faxes on the computer.
Note:
See the help of FAX Utility for the operating instructions.
2. Enter Setup from the home screen.
3.
Select Fax Settings > Output Settings > Fax Output.
4. Check the settings.
Note:
Once the received documents are saved on the computer, they are deleted from the printer. To print the documents
automatically while saving them on the computer, select Save then Print.
Related Information
& “FAX Utility” on page 100
& “Managing Contacts” on page 34
& “Setup Mode” on page 18
User's Guide
Faxing
74