4. Select Setup.
5. Select Maintenance.
You see a screen like this:
6. Select Print Head Alignment.
7. Do one of the following:
• If vertical lines are misaligned, select Ruled Line Alignment.
• If your printouts look blurry, select Vertical Alignment.
• If you see horizontal bands at regular intervals, select Horizontal Alignment.
8. Follow the on-screen instructions to print an alignment sheet.
Note: Do not cancel printing while you are printing head alignment patterns.
9. Check the printed patterns on the alignment sheet and do one of the following:
• If you printed a ruled line alignment sheet, select the number representing the pattern with the
least misaligned vertical line.
338
To Next Page
Loading...
