Epson WF-8590 - Safety and Approvals Specifications

Coordination modes Infrastructure mode
Ad hoc mode (not supported for IEEE 802.11n)
Wi-Fi Direct mode (not supported for IEEE 802.11b or IEEE
802.11n)
Note: Wi-Fi Direct Simple AP mode available even if you connect
the product to an Ethernet network.
Ethernet
Standards IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T); to prevent risk of radio interference,
use a Category-5e or higher shielded twisted pair cable
IEEE802.3az (Energy Efficient Ethernet); connected device should
be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector RJ-45
Security Protocol
• IEEE802.1X (requires a connected device compliant with IEEE802.1X)
• IPsec/IP Filtering
• SSL/TLS; HTTPS Server/Client and IPPS
• SNMPv3
Parent topic: Technical Specifications
Safety and Approvals Specifications
United States Safety: UL60950-1
EMC: FCC part 15 Subpart B class B
420