Epson WF-C878R Series Hardware Setup Guide

3. Authentication Device
If you want to use the authentication device in the authentication system, connect the authentication device with a
USB cable and check that it works.
Mounting the Authentication Device Table
You can attach a stand to the MFD to place the authentication device (optional).
1. Install from the rear of the control panel.
2. Insert the protruding section of the dedicated authentication device platform into the hole on the control
panel.
Hardware Setup Guide
3. Authentication Device
12

Epson WF-C878R Series Specifications

General

Print Technology	PrecisionCore Heat-Free Technology
Max Print Resolution	4800 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Max Scan Resolution	1200 x 2400 dpi
Fax	Yes
Print Speed (Black)	25 ppm (ISO)
Print Speed (Color)	24 ISO ppm
Scanner Type	Flatbed, ADF
Paper Formats	A4, A5, A6, B5, Letter, Legal
Display	4.3" color touchscreen
Mobile Printing	Apple AirPrint, Mopria Print Service
Ink Type	DURABrite Ultra pigment ink
Ink Cartridges	Black, Cyan, Magenta, Yellow