Receiving Faxes
19
To receive faxes automatically, make sure the
Auto Answer
light is turned on. To turn it on, press the
Auto Answer
button, then press
OK
.
Note: To change the number of rings before the product
answers, see page 17.
If you run out of paper during printing, you see the error
message
Paper out
. Load more paper and press the
OK
button to continue.
To receive faxes manually, turn off the
Auto Answer
light and follow these steps:
1. When your telephone rings, lift the phone off the hook.
2. Press
2
to receive the fax, then press
1
at the next screen.
3. After all the pages are received, you see the Fax ready screen. Replace the phone on the
hook to start printing your fax.
Auto Answer
light
andes_p2_QG.book Page 19 Wednesday, May 25, 2011 3:39 PM
To Next Page
Loading...
