Epson WorkForce 600 Series Network Installation Guide

Wired (Ethernet) Installation 21
8. When you see this screen, click
Next to configure the printer’s IP address
automatically (recommended).
Note:
To configure the IP address manually, click Change. On the next screen, select Set
the IP address manually (advanced), and click Next. Enter the IP address, subnet
mask, and default gateway, then click Next.
9. Select Read/Write or Read Only to allow the printer’s memory card slots to
be accessed over the network (Windows only).
10. Click
Next.

Epson WorkForce 600 Series Specifications

General

Brand	Epson
Model	WorkForce 600 Series
Category	All in One Printer
Language	English