To enter the password, press the d Down or u Up button to select the character and press the r Right
button to determine the character. After all characters are determined, press the OK button.
Note:
If you forget your password, contact your dealer. Note that when the password is initialized, the settings
and data stored on the printer are deleted. Depending on your environment, settings, such as network
connection settings, may need to be done again. We recommend making a note or backup of the
necessary data and setting information.
Limitation
Changes the restriction range. When Interface is selected, the password is required to change the
settings in the USB and Network menus. When Config is selected, the password is required to enter
Quick Print JobMenu or ConfidentialJobMenu, or to change the settings in all menus. When
All is selected, the password is required to enter Quick Print JobMenu or
ConfidentialJobMenu, or to change the settings and to perform the items in all menus. Before
changing the setting, you have to enter the password set in the Password Config setting.
Energy Saver Menu
Item Settings (default in bold)
Time to Sleep
1Min, 3Min, 5Min, 15Min, 30Min, 60Min, 120Min
Deep Sleep Mode
On, Off
Power Off Timer
*
On, Off
Time to Off
*
120Min, 180Min, 240Min, 360Min, 480Min
*
For EU models only
Time to Sleep
Specifies the length of the time until the printer enters the sleep mode or deep sleep mode if there are
no button operations and no jobs to be printed.
Deep Sleep Mode
When this setting is set to On, the printer switches into the deep sleep mode at the time specified in the
Time to Sleep setting if the printer is not operated or receives no jobs. In the deep sleep mode, the
Wakeup/Sleep button lights and more power is saved than when in the sleep mode.
AL-M300/AL-M400 Series User's Guide
Using the Control Panel 87
To Next Page
Loading...
Need help?
General
Weight and Dimensions
