Epson WorkForce Pro WF-4720 series User Manual

❏ EPSON Status Monitor 3: Enabled
Note:
❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and
then select Enable EPSON Status Monitor 3.
❏ Composite black looks slightly dierent from pure black. In addition, the print speed is reduced.
❏ To maintain the quality of the print head, black ink is also consumed.
Options Description
Yes Select to use a mixture of color inks to create black. This window is displayed the next time
you print a similar job.
No Select to continue using the remaining black ink. This window is displayed the next time
you print a similar job.
Disable this feature Select to continue using the remaining black ink. This window is not displayed until you
replace the black ink cartridge and it runs low again.
User's Guide
Replacing Ink Cartridges and Other Consumables
144

Epson WorkForce Pro WF-4720 series Specifications

General

Print Resolution	4800 x 1200 dpi
Duplex Printing	Yes
Scan Resolution	1200 x 2400 dpi
Paper Capacity	250 sheets
Display	2.7" Color Touchscreen
Functions	Print, Copy, Scan, Fax
Fax Memory	Up to 180 pages
Fax Speed	33.6 kbps
Print Speed (Black/Color)	20 ppm (black), 20 ppm (color)
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Automatic Document Feeder (ADF)	35 sheets
Ink Cartridge Configuration	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)