Epson WorkForce Pro WF-4720 series - Placing Originals on the ADF for 2-Up Copying; Placing Originals on the Scanner Glass

4. Slide the ADF edge guide to the edge of the originals.
Related Information
& “Available Originals for the ADF” on page 49
Placing Originals on the ADF for 2-up Copying
Place the originals in the direction shown in the illustration, and then select the orientation setting.
❏ Placing the originals in the up direction: Select Up Direction on the control panel as described below.
Copy > Advanced Settings > Orientation (Original) > Up Direction
Place the originals on the ADF in the direction of the arrow.
❏ Placing the originals in the le direction: Select Le Direction on the control panel as described below.
Copy > Advanced Settings > Orientation (Original) > Le Direction
Place the originals on the ADF in the direction of the arrow.
Placing Originals on the Scanner Glass
!
Caution:
Be careful not to trap your hand or ngers when opening or closing the document cover. Otherwise you may be
injured.
c
Important:
When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.
User's Guide
Placing Originals
51