Epson WorkForce Pro WF-4830 Series - Page 370

5.
Select the Network Security tab > SSL/TLS >
Certicate
.
6.
Click one of the download buttons of CSR according to a specied format by each certicate authority to
download a CSR to a computer.
c
Important:
Do not generate a CSR again. If you do so, you may not be able to import an issued CA-signed
Certicate
.
7.
Send the CSR to a certicate authority and obtain a CA-signed Certicate.
Follow the rules of each
certicate
authority on sending method and form.
8.
Save the issued CA-signed Certicate to a computer connected to the printer.
Obtaining a CA-signed
Certicate
is complete when you save a
certicate
to a destination.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 271
CSR Setting Items
Items Settings and Explanation
Key Length Select a key length for a CSR.
Common Name You can enter between 1 and 128 characters. If this is an IP address, it should be a
static IP address. You can enter 1 to 5 IPv4 addresses, IPv6 addresses, host names,
FQDNs by separating them with commas.
The rst element is stored to the common name, and other elements are stored to
the alias eld of the certicate subject.
Example:
Printer's IP address : 192.0.2.123, Printer name : EPSONA1B2C3
Common Name : EPSONA1B2C3,EPSONA1B2C3.local,192.0.2.123
Organization/ Organizational Unit/
Locality/ State/Province
You can enter between 0 and 64 characters in ASCII (0x20-0x7E). You can divide
distinguished names with commas.
Country Enter a country code in two-digit number specied by ISO-3166.
Sender's Email Address You can enter the sender's email address for the mail server setting. Enter the
same email address as the Sender's Email Address for the Network tab > Email
Server > Basic.
Related Information
& “Obtaining a CA-signed Certicate” on page 369
Administrator Information > Advanced Security Settings > Using a Digital Certicate
370