You see this screen:
4. Select Wi-Fi Setup Wizard and press the OK button.
Note: If you need to disable the wireless network to set up your product on an Ethernet network,
select Disable Wi-Fi instead. Then follow the instructions on the Start Here sheet to set up your
product on a wired network and install the necessary software from the product CD. The installer
program guides you through network setup.
5. Select the name of your wireless network (SSID) or enter the name manually.
Note: To enter the wireless network name manually, select Other SSIDs and press the OK button.
Use the displayed keypad to enter your network name, as described in the next step.
23
To Next Page
Loading...
