Epson WorkForce WF-M1030 Important Safety Instructions

Important Safety Instructions 3
■ Remove the yellow tape from the cartridge before installing it; otherwise, print quality may
decline or you may not be able to print.
■ Do not remove or tear the label on the cartridge; this can cause leakage. Do not remove the
transparent seal from the bottom of the cartridge; otherwise, the cartridge may become
unusable.
■ If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the product. Note that there is a valve in the ink supply
port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining
items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding
area.
■ Store ink cartridges with their labels facing upward. Do not store cartridges upside down.
■ Do not disassemble or remodel an ink cartridge; otherwise, you may not be able to print
normally.
■ Use an ink cartridge before the date printed on its package.
■ Store ink cartridges in a cool, dark place.
■ You cannot use the cartridge that came with the product for replacement.
■ Although the ink cartridge may contain recycled materials, this does not affect product
function or performance.
WF-M1030_notices.fm Page 3 Wednesday, September 5, 2012 2:29 PM

Epson WorkForce WF-M1030 Specifications

Printing Specifications

maximum print resolution	1440 x 720 optimized dpi
maximum print speed	34 ppm
ISO print speed	15.0 ISO ppm
minimum ink droplet size	3 picoliters

Connectivity

standard connectivity	Hi-Speed USB
wireless connectivity	802.11 b/g/n
ethernet connectivity	10/100

Paper Handling

maximum paper size	8.5" x 44"
input paper capacity	100 sheets plain paper, 10 envelopes
duplex printing	manual

Operating Environment

operating temperature	50 ° to 95 °F (10 ° to 35 °C)
storage temperature	-4 ° to 104 °F (-20 ° to 40 °C)
operating relative humidity	20 – 80%

Power

rated voltage	100 – 240 V
rated frequency	50 – 60 Hz
rated current	0.6 Amp

Weight and Dimensions

printing dimensions (W x D x H)	15.4" x 20.9" x 11.7"
storage dimensions (W x D x H)	15.4" x 10.4" x 5.8"
weight	7.1 lb