Epson XP-15000 Series - Updating the Printers Firmware Using the Control Panel

Related Information
& “Soware Update Tools (EPSON Soware Updater)” on page 128
Updating the Printer's Firmware using the Control Panel
If the printer is connected to the Internet, you can update the printer's rmware using the control panel. By
updating the rmware, the printer's performance may improve, or new functions may be added. You can also set
the printer to regularly check for rmware updates and notify you if any are available.
1. Select Settings on the home screen.
2. Select Firmware Update > Update.
Note:
Enable
Notication
to set the printer to regularly check for available
rmware
updates.
3. Check the message displayed on the screen and press the OK button to start searching for available updates.
4. If a message is displayed on the LCD screen informing you that a rmware update is available, follow the on-
screen instructions to start the update.
c
Important:
❏ Do not turn
o
or unplug the printer until the update is complete; otherwise, the printer may malfunction.
❏ If the
rmware
update is not completed or is unsuccessful, the printer does not start up normally and
"Recovery Mode" is displayed on the LCD screen the next time the printer is turned on. In this situation, you
need to update the rmware again using a computer. Connect the printer to the computer with a USB cable.
While "Recovery Mode" is displayed on the printer, you cannot update the
rmware
over a network
connection. On the computer, access your local Epson website, and then download the latest printer
rmware. See the instructions on the website for the next steps.
User's Guide
Network Service and Software Information
131