CD/DVD Tray is Ejected
❏ Make sure the disc is properly set on the tray and reinsert the tray correctly.
❏ Do not insert the CD/DVD tray until you are instructed to do so. Otherwise, an error occurs and the tray is
ejected.
Related Information
&
“Loading a CD/DVD” on page 56
Business Card Size Paper is Not Ejected
When business card size paper is not ejected and remains inside the printer, load A4 size paper in the rear paper
feed to remove it. Select Paper Guide Cleaning on the control panel to eject the paper with the A4 size paper.
Load the business card size paper again in the portrait direction aligning it with the arrow mark on the center of
the rear paper feed.
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P
button for a little longer.
Power Does Not Turn O
Hold down the
P
button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it o by pressing the
P
button.
Power Turns O Automatically
❏ Select Settings > Basic Settings > Power O Settings, and then disable the Power O If Inactive and Power
O If Disconnected settings.
❏ Select Settings > Basic Settings, and then disable the Power O Timer Setting.
Note:
Your product may have the Power O Settings or Power O Timer feature depending on the location of purchase.
LCD Screen Gets Dark
e printer is in sleep mode. Press any button on the control panel to return the LCD screen to its former state.
User's Guide
Solving Problems
139
To Next Page
Loading...
