Epson XP-15000 Series - Checking the Printer Status - Windows; Checking the Printer Status - Mac os

Error Messages Solutions
The combination of the IP address and the
subnet mask is invalid. See your documentation
for more details.
Enter the correct IP address or default gateway. Contact the person who
setup the network for assistance.
To use cloud services, update the root certicate
from the Epson Web Cong utility.
Run Web Cong, and then update the root certicate.
Recovery Mode The printer has started in recovery mode because the rmware update
failed. Follow the steps below to try to update the rmware again.
1. Connect the computer and the printer with a USB cable. (During
recovery mode, you cannot update the rmware over a network
connection.)
2. Visit your local Epson website for further instructions.
*
In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage
from the pad, the product is designed to stop printing when the pad has reached its limit. Whether and how oen
this is required will vary according to the number of pages you print using the borderless print option. e need
for replacement of the pad does not mean that your printer has ceased to operate in accordance with its
specications. e printer will advise you when the pad requires replacing and this can only be performed by an
authorised Epson Service provider.
e
Epson warranty does not cover the cost of this replacement.
Related Information
&
“Installing Applications” on page 130
&
“Application for
Conguring
Printer Operations (Web
Cong
)” on page 118
& “Updating Applications and Firmware” on page 130
Checking the Printer Status - Windows
1. Access the printer driver window.
2. Click EPSON Status Monitor 3 on the Maintenance tab.
Note:
❏ You can also check the printer status by double-clicking the printer icon on the taskbar. If the printer icon is not
added to the taskbar, click Monitoring Preferences on the Maintenance tab, and then select Register the shortcut
icon to the taskbar.
❏ If EPSON Status Monitor 3 is disabled, click Extended Settings on the Maintenance tab, and then select Enable
EPSON Status Monitor 3.
Related Information
& “Windows Printer Driver” on page 120
Checking the Printer Status - Mac OS
1. Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer.
User's Guide
Solving Problems
133