Epson XP-15000 Series - Page 53

❏ Envelope
Load envelopes with the ap on the le side.
❏ Pre-punched paper
Load a single sheet of dened size plain paper with binding holes at the le or right. Adjust the print
position of your
le
to avoid printing over the holes.
4. Slide the edge guides to the edges of the paper.
5.
Check the paper size and paper type settings displayed on the control panel. To use the settings, select OK. To
change the settings, select the item that you want to change, and then go to the next step.
To select an item, move the focus to the item using the
u d l r buttons, and then press the OK button.
Note:
❏ By registering frequently used combinations of paper size and paper type as a favorite, you do not need to set them
each time. You can make paper settings just by selecting the registered preset.
To register a preset, select Favorite Paper Settings, press
r on the next screen and then specify the paper size and
paper type.
❏
e
paper setting screen is not displayed if you have disabled Paper
Conguration
in the following menus. In this
situation, you cannot print from an iPhone or iPad using AirPrint.
Settings > Printer Settings > Paper Source Setting > Paper Conguration
User's Guide
Loading Paper
53