Epson XP-2100 Series User Manual

+
Wi-Fi Direct (Simple AP) Setup
Hold down the
and buttons simultaneously to start Wi-Fi Direct (Simple AP) Setup.
+
Restore Default Network Settings
Turn the printer on while holding down the
button to restore the default network settings.
When the network settings are restored, the printer turns on and the network status lights ash
alternately.
+
Print Nozzle Check Pattern
Turn the printer on while holding down the
y button to print the nozzle check pattern.
Related Information
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 25
& “Making Wi-Fi Direct (Simple AP) Connection Settings” on page 26
& “Restoring the Network Settings from the Control Panel” on page 34
& “Checking and Cleaning the Print Head - Printer Buttons” on page 91
Lights and Printer Status
Lights on the control panel indicates the status of the printer.
Normal Status
: On
Light Status
The printer is connected to a wireless (Wi-Fi) network.
The printer is connected to a network in Wi-Fi Direct (Simple AP) mode.
Error Status
When an error occurs, the light turns on or ashes. Details of the error are displayed on the computer screen.
/ : On
/ : Flashing
Light Status Solutions
Wi-Fi connection error has occurred. Press the button to clear the error and try again.
User's Guide
Printer Basics
17

Epson XP-2100 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Max Scan Resolution	1200 x 2400 dpi
Functions	Print, Scan, Copy
Duplex Printing	Manual
Display	No
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Mobile Printing	Epson iPrint, Apple AirPrint
Ink Cartridges	Black, Cyan, Magenta, Yellow
Dimensions (W x D x H)	390‎ x 300 x 146 mm
Print Speed (Black)	8 ppm (ISO/IEC 24734)