Note:
If you cannot cancel printing from the computer, cancel using the printer's control panel.
Follow the steps below when printing again.
1.
Access the printer driver window.
2.
Clear Borderless on the Main tab.
3.
Select a Paper Type that supports Print in Black.
4.
Select Grayscale.
5.
Set the other items on the Main and More Options tabs as necessary, and then click OK.
6.
Click Print.
7.
Click Print in Black in the window displayed.
Related Information
& “Temporarily Printing with Black Ink” on page 142
Continue Printing Temporarily with Only Black Ink (Mac OS)
Note:
To use this feature through a network, connect with Bonjour.
1.
Click the printer icon in the Dock.
2.
Cancel the job.
Note:
If you cannot cancel printing from the computer, cancel using the printer's control panel.
3.
Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer. Click Options & Supplies > Options (or Driver).
4.
Select On as the Permit temporary black printing setting.
5.
Access the print dialog.
6.
Select Print Settings from the pop-up menu.
7.
Select any paper size except for a borderless size as the Paper Size setting.
8.
Select a paper type that supports Permit temporary black printing as the Media Type setting.
9.
Select Grayscale.
10.
Set the other items as necessary.
Solving Problems
>
It is Time to Replace the Ink Cartridges
>
Continue Printing Temporarily without Replacing In
…
144
To Next Page
Loading...
Need help?
General
