& “Replacing a Maintenance Box” on page 146
Maintenance
Select the menus on the control panel as described below.
Settings > Maintenance
Nozzle Check:
Select this feature to check if the print head nozzles are clogged. e printer prints a nozzle check
pattern.
Head Cleaning:
Select this feature to clean clogged nozzles in the print head.
Power Cleaning:
Select this feature to perform power cleaning if the print head is severely clogged or is still clogged
aer repeating standard cleaning. More ink is consumed than in usual cleaning.
Print Head Alignment:
Vertical Alignment:
Select this feature if your printouts look blurry or text and lines are misaligned.
Horizontal Alignment:
Select this feature if horizontal banding appears at regular intervals in your printouts.
Ink Cartridge(s) Replacement:
Use this feature to replace the ink cartridges before the ink is expended.
Maintenance Box Service Life:
Displays the approximate service life of the maintenance box. When is displayed, the
maintenance box is nearly full. When
is displayed, the maintenance box is full.
Paper Guide Cleaning:
Select this feature if there are ink stains on the internal rollers. e printer feeds paper to clean the
internal rollers.
Related Information
& “Checking and Cleaning the Print Head” on page 70
& “Running Power Cleaning” on page 72
& “Aligning the Print Head” on page 73
& “Replacing Ink Cartridges” on page 139
& “Replacing a Maintenance Box” on page 146
& “Cleaning the Paper Path for Ink Smears” on page 73
Product Information
>
Settings Menu List
>
Maintenance
164
To Next Page
Loading...
