It is Time to Replace the Maintenance Box
Maintenance Box Handling Precautions
Read the following instructions before replacing the maintenance box.
❏ Do not touch the sections shown in the illustration. Doing so may prevent normal operation and you may get
smeared with ink.
❏ Do not drop the maintenance box or subject it to strong shocks.
❏ Do not replace the maintenance box during printing; otherwise, ink may leak.
❏ Do not remove the maintenance box and its cover except when replacing the maintenance box; otherwise ink
may leak.
❏ When the cover cannot be reattached, the maintenance box may not be installed correctly. Remove the
maintenance box, and re-install it.
❏ Do not tilt the used maintenance box until
aer
it is sealed in the plastic bag; otherwise ink may leak.
❏ Do not touch the openings in the maintenance box as you may get smeared with ink.
❏ Do not reuse a maintenance box which has been removed and le detached for a long period. Ink inside the box
will have
solidied
and no more ink can be absorbed.
❏ Keep the maintenance box out of direct sunlight.
❏ Do not store the maintenance box in high or freezing temperatures.
Replacing a Maintenance Box
In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink
leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the
maintenance box has reached its limit. Whether and how
oen
this is required will vary according to the number
of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs.
Replace the maintenance box when you are promoted to do so.
e
Epson Status Monitor, your LCD, or lights on
the control panel will advise you when this part needs replacing.
e
need for replacement of the box does not
Solving Problems
>
It is Time to Replace the Maintenance Box
>
Replacing a Maintenance Box
146
To Next Page
Loading...
Need help?
General
