172
5. Select Coloring Book.
6. Select one of the following settings:
• Scan an Original to print a design from an original placed facedown on the scanner glass, in the
front right corner
• Photo on Memory Card to print a design from a memory card inserted in your product, then
select a photo
7. Select the size and type of paper that you loaded, and where you loaded it.
8. If necessary, adjust the following settings:
• Density to make the print lighter or darker
• Line Detection to change the amount of detail in the print
9. Select Copies and use the numeric keypad to select the number of copies (up to 99).
10. When you are ready to print, select the Print icon.
Note: To cancel printing, select Cancel, then select Cancel again to confirm.
Parent topic: Printing Personalized Projects
Related tasks
Inserting a Memory Card
Related topics
Loading Paper
Placing Originals on the Product
Printing Personalized Note Paper
You can print lined or unlined note paper with one of your own photos in the background.
1. Load plain paper in either Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches
[210 × 297 mm]) size.
2. Insert a memory card into your product's memory card slot.
3. Press the home button, if necessary.
To Next Page
Loading...
