Other Information
EQD 21 EQ2288F
Specifications
Note: Product Specifications are subject to change without notice.
Model EQ2288F
LCD Type
21.6” TFT Active Matrix RGB
0.248 (H) x 0.248 (V) mm pixel
Color Filter
Glass surface
RGB vertical stripe
Anti-Glare
Input signal
RGB
RF
Video
RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync, fh: 30-80 kHz,
fv:50-75 Hz
TV system Antenna/ NTSC+ATSC,
TV cable system/CATV+Digital cable
1 composite RCA, 1 S-Video, 1 YPbPr component, 1 HDMI
Audio
1 mini-stereo,
2 pair of RCA (L/R) stereo
Compatibility PC
640 x 480 @ 60Hz
640 x 480 @ 75Hz
800 x 600 @ 60Hz
800 x 600 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 75Hz
1280 x 1024 @ 60Hz
1920 x 1080 @ 60 Hz
Reduced Blinking Mode Up to 1920 x 1080 @ 60 Hz , VGA mode
Resolution Table
Recommended
and supported
(AV/S-Video Mode)
NTSC
Recommended
and supported (YPbPr/
HDMI Mode)
480i@60Hz 1080i @ 60Hz
480p @ 60Hz 1080p @ 60Hz
720p @ 60 Hz
Speaker Output 3W x 2 @ THD=10%
Audio Output 1 Headphone jack
Power Voltage 100-240 VAC, 50/60 Hz (auto switch)
Display area Full Scan
477.504mm (H) x 268.596mm (V)
13.6” (H) x 7.6” (V)
Operating
conditions
Temperature
Humanity
Altitude
32°F to + 104°F (0°C to + 40°C)
20% to 65% (no condensation)
To 10,000 feet (3,000m)
Storage
condition
Temperature
Humanity
Altitude
-4°F to + 140°F (-20°C to + 60°C)
10% to 90% (no condensation)
To 40,000 feet (12,000m)
Dimensions
Physical
(W)x(H)x(D)
531mm x 421mm x 213mm
20.9"x16.57"x8.38"
Weight Net 6.0 kg (13.2 lb)
Regulations
UL/cUL, FCC-B (Doc-B), BETS-7,
ENERGY STAR
®
Power
consumption
On
Standby
Max. 60 W (blue LED)
< 1 W at 110/220 Vac only (orange LED)
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent
damage to the LCD TV.
To Next Page
Loading...