Need help?Do you have a question about the Equinox Systems EQLED136 and is the answer not in the manual?
General| LED Quantity | 136 |
|---|---|
| LED Colour | RGB |
| Power Consumption | 15W |
| Power Supply | AC 100-240V, 50/60Hz |
| Weight | 1.2 kg |
| Connector | 3-pin XLR |
| Type | LED Effect |
| Control | DMX, Sound Active, Auto, Master/Slave |
| Voltage | 100-240V |
| Effects | Strobe |
Check for damage during transport, consult dealer if damaged, follow manual for safe operation.
Keep away from liquids; beware of high voltage and electric shock risk.
Follow manual, avoid cable contact, don't open unit, avoid short intervals, use indoors.
Incorrect operation can cause damage, danger, and void warranty. Ensure user and others safety.
Instructions to access DMX address and channel mode via menu buttons.
Instructions for setting the unit to operate in slave mode with a master unit.
Detailed explanation of each button's function on the IR remote control.
Explains how to set a unique start address for each fixture in DMX mode.
Warning against connecting cable shield to ground lug to prevent short circuits.
To Next Page
