Equinox Systems MaxiPar Quad - Page 7

www.prolight.co.uk MaxiPar Quad User Manual
7
Colour mix mode:
In this mode you can set the xture to any colour and any brightness.
To access the colour mix mode press “MENU” until the display shows Pr-- on the LED display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to select Pr00.
Press the “ENTER” button to show r--- with 3 digits after on the LED display.
Press the “ENTER” button to conrm.
The r represents red, G= green, b= blue and u= white.
The 3 digits after are the brightness setting from 000 ~ 255.
For example:
If you set r, G, b and u all to zero, your unit will have no LEDs lit up (blackout).
If you set r000 to r255 and G, b and u to zero, your unit will show only red LEDs.
Press the “ENTER” button to conrm the setting and move to the next colour.
To exit out of any of the above options, press the “MENU” button.
Built-in program mode:
To access built-in program mode press “MENU” until the display shows Pr-- on the LED display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between Pr01 ~ Pr06.
Press the “ENTER” button to conrm.
To exit out of any of the above options, press the “MENU” button.
Built-in program speed setting:
To access built-in program speed setting press “MENU” until the display shows SPEE on the
LED display. Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between
SP 1 (slow) ~ SP 9 (fast).
Press the “ENTER” button to conrm.
To exit out of any of the above options, press the “MENU” button.
Sound mode:
To access sound mode press “MENU” until the display shows Soun on the LED display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between So01 ~ So06.
Press the “ENTER” button to conrm.
To exit out of any of the above options, press the “MENU” button.
Pr01 - 4 colour fade in/out
Pr02 - 7 colour fade in/out
Pr03 - Colour fade
Pr04 - 7 colour fade in/out
+ colour fade
Pr05 - 4 colour change
Pr06 - 7 colour change
So01 - 4 colour fade in/out
So02 - 7 colour fade in/out
So03 - Colour fade
So04 - 7 colour fade in/out
+ colour fade
So05 - 4 colour change
So06 - 7 colour change
Operating instructions