Equinox Systems PIXELpoint Batten - Comprehensive Operating Mode Instructions; Strobe, Colour Change, Fade, and Pulse Control; Flow Effect and Sound Mode Configuration

www.prolight.co.uk PIXELpoint Batten User Manual
11
Operating instructions
To add a strobe to your colour mix, press the “MENU” button to show F000 on the LED display.
Now use the “UP” and “DOWN” buttons to choose the desired speed between F000 ~ F255.
To exit out of any of the above options, press the “MENU” button.
Colour change:
To access the colour change mode, press the “MENU” button to show CC01 on the LED display. Now
use the “UP” and “DOWN” buttons to choose the desired speed between CC01 ~ CC15.
To exit out of any of the above options, press the “MENU” button.
Colour fade:
To access the colour fade mode, press the “MENU” button to show dE01 on the LED display. Now use
the “UP” and “DOWN” buttons to choose the desired speed between dE01 ~ dE15.
To exit out of any of the above options, press the “MENU” button.
Colour pulse:
To access the colour pulse mode, press the “MENU” button to show CP01 on the LED display. Now
use the “UP” and “DOWN” buttons to choose the desired speed between CP01 ~ CP15.
To exit out of any of the above options, press the “MENU” button.
Static colour mode/colour fade in/out mode:
To access the static colour mode, press the “MENU” button to show CL01 on the LED display.
Now use the “UP” and “DOWN” buttons to choose the desired colour between CL01 ~ CL07.
To then access the colour pulse mode, press the “UP” and “DOWN” buttons to select between CL08
~ CL15. Press the “ENTER” button to conrm the setting and use the “UP” and “DOWN” buttons to
select the speed between Sp01 ~ Sp15. Press the “ENTER” button to conrm the setting.
To exit out of any of the above options, press the “MENU” button.
Flow effect mode:
To access the ow effect modes press “MENU” until EA-1 shows on the LED display. To choose a ow
effect, press the “UP” button until you nd your desired setting beween EA-1 ~ E9-1 Then use the
“DOWN” button to select the colour. Press the “ENTER” button use the “UP” and “DOWN” buttons to
select the speed between SP 1 ~ SP15.
To exit out of any of the above options, press the “MENU” button.
Sound modes:
To access the sound modes (built-in programs), press the “MENU” button to show SUd1 on the LED
display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose the required
sound mode SUd1 ~ SUd3. Press the “ENTER” button and use the “UP” and “DOWN” buttons to
select the sound sensitivity between SEO1 ~ SE15.
Press the “ENTER” button to conrm the setting.
To exit out of any of the above options, press the “MENU” button.