Equinox Systems SpectraPix Batten - Advanced Operation Settings

www.prolight.co.uk SpectraPix Batten User Manual
11
Operating instructions
Master/slave mode:
The default setting for this xture is master. To set the master unit, select from one of the auto, show,
sound, colour mix or static colour modes.
To set the slave unit, press the “MENU” button to show SLav on the LED display.
The unit is now in slave mode. To exit out of any of the above options, press the “MENU” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Software version:
To view the xtures software version, press the “MENU” button to show Info on the LED display.
Now press the “ENTER” button to show ver, press the “ENTER” button again and the software version
will be displayed. To exit out of any of the above options, press the “MENU” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Display backlight setting:
To access the display backlight setting, press the “MENU” button to show Set on the LED display. Now
press the “ENTER” button and use the “UP” and “DOWN” buttons to select dIS. Press the “ENTER”
button and use the “UP” and “DOWN” buttons to select between 10 S (10 seconds),
20 5 (20 seconds), 30 5 (30 seconds), 60 5 (60 seconds) or on (constantly on).
Press the “ENTER” button to conrm the setting.
To exit out of any of the above options, press the “MENU” button.
Program direction setting:
To access the program direction setting, press the “MENU” button to show Set on the LED display.
Now press the “ENTER” button and use the “UP” and “DOWN” buttons to select dir. Press the
“ENTER” button and use the “UP” and “DOWN” buttons to select between E--- or ---3.
Press the “ENTER” button to conrm the setting.
To exit out of any of the above options, press the “MENU” button.