ELite 3, User Manual
Page 6/72
1.2.1. Patient Testing
The analyzer can process 80 samples per hour in 3-part WBC differential mode.
Samples can have individual sample data, and additional parameters.
You can print results to an external or to the optional built-in printer. The user can
customize the report format.
The analyzer determines the following 20 hematology parameters, including 3-part
WBC differential, from a 25 µl whole blood sample:
WBC total white blood cell count
LYM lymphocytes count
MON monocytes count
GRA granulocytes count
LYM% lymphocytes percentage
MON% monocyte percentage
GRA% granulocytes percentage
HGB hemoglobin
RBC red blood cell count
HCT hematocrit
MCV mean corpuscular volume
MCH mean corpuscular hemoglobin
MCHC mean corpuscular hemoglobin concentration
RDWc v red cell distribution width*
RDWsd red cell distribution width*
PLT platelet count
PCT plateletcrit (trombocrit)
MPV mean platelet volume
PDWcv platelet distribution width*
PDWsd red cell distribution width*
* RDW and PDW parameters have two forms of representation: CV and SD.
Both parameters describe the distribution width, but from different aspects.
User can select the units to use for displaying RDW and PDW parameters.
To Next Page
Loading...