Settings
Measurement
Profile
The default lyse volume can be set for each
profile.
9.3.4. Settings
Settings
Measurement / Settings/Result
Auto print will print the report automatically
when the results are displayed
Auto send will automatically transmit
results if a PC is connected
Barcode allows setting scanned data to be
entered as Sample ID or Patient ID
Accept saves changes made
Cancel returns to previous menu discarding
changes made
Settings
Measurement / Settings/Calibration
Mode allows choosing between HCT/PCT
or MCV/MPV based calibration
Accept saves changes made
Cancel returns to previous menu discarding
changes made
To Next Page
Loading...