Ericsson AXX 9100 CONNECT - Page 44

AXX 9100 CONNECT R1.2 Quick Reference Guide
3/1531-ZAP 701 14/1 Uen A 2006-10-16
40
3. A logon window is presented for you.
Figure 20 AXX 9820 CRAFT Logon Window
4. If present, select desired network element from Ip pull-down
menu.
Figure 21 Selection of IP address - Logon window
The system adds the selected IP address to the logon window.
You can also fill in the IP address manually.
5. Enter community string in the password field.
NOTE! For non-AXXMETRO NEs, enter the configured SNMP
community string in the password field. The User field is not
applicable for NE types other than AXXMETRO.
6. Click Logon to continue.
Community access levels:
The network element supports three community access levels
• ReadOnly - only read access to the whole MIB
• ReadWrite - read and write to the MIB, but can not change
community strings
• Super - read and write to the complete MIB.