Switching the system on/off
17
Chapter 3 Switching the system on/off
The cordless system can be switched on and off with the switch at the bottom
side of the radio exchange (see figure 1).
Switching the radio exchange on/off also switches the base stations on/off.
Once operational there is no need to switch the system off. Switching the system
off is only necessary if the system has problems.
After switching on, the system must function properly within 90 seconds, with
no red LEDs on.
Note
All current calls will be lost if the system is switched off.
Fig. 2 Bottom side radio exchange with on/off switch and connectors
l 0
016
PC connector
(RS232)
Base station connectors
Printer
connector
Phone line
connections
On/off switch
Power connector
LEDs
To Next Page
Loading...