Ericsson DCT1800-S - Replacing a Cordless Phone; Adding a Cordless Phone

Using CSM
29
6.4 Replacing a cordless phone
To replace a cordless phone, for example when it is defective:
1. Cancel the subscription of the defective cordless phone in CSM: use the
‘Delete Subscription’ option in the ‘Cordless Phone’ menu.
2. Another cordless phone can be subscribed to the same extension number.
Use the ‘Subscribe Cordless Phone’ option in the ‘Cordless Phone’ menu
and fill in the IPEI number of the cordless phone.
3. Subscribe the cordless phone (see the user’s guide of the cordless phone).
4. It is recommended to make a new backup of the cordless system data: use
the ‘System Backup’ option in the ‘File’ menu. Your supplier can restore
this backup in case of serious system troubles.
Note
When the subscription has been cancelled, you can subscribe another cordless
phone to the same extension number.
6.5 Adding a cordless phone
The cordless system needs to know which cordless phones are in use. Before
a cordless phone can be used, it must be subscribed to the cordless system.
Note
Adding a cordless phone is only possible if there are free line connections
between PABX and the cordless system. If there are no free line connections
any more, please contact your supplier.
To add a cordless phone with CSM:
1. Select an extension number and use the ‘Subscribe Cordless Phone’ option
in the ‘Cordless Phone’ menu.
2. It is recommended to make a new backup of the cordless system data: use
the ‘System Backup’ option in the ‘File’ menu. Your supplier can restore
this backup in case of serious system troubles.