53Dialog 4223 Professional/Dialog 4225 Vision
During Calls
Conference
With this procedure you can include up to seven parties in a
conference. Only the conference leader (i.e. the person initiating the
conference) can admit participants. During the conference a tone
will be heard every 15 seconds.
Note: The conference tone might be disabled for your
system.
You have an ongoing conversation (Line 1) and want to establish a
phone conference. You will become the conference leader.
Conf/Transf Press (see display).
Note: You can also press Line 2 or Inquiry.
z Call the third party.
Wait for answer.
Conference Press to establish a conference (see display).
Note: You can also press
3 or Conference (Function key
preprogrammed by you).
Repeat the procedure to add more conference members.
d Replace the handset to leave the conference.
Note: A tone burst is heard each time a participant enters
or leaves the conference. When the conference leader
leaves the conference, the conference will continue with the
other included parties. The conversation is changed back to
a normal two party connection when there is only two
parties left.
To Next Page
Loading...
