15
Enhanced Charger (344A4616P2) with Remote Control Unit
The following equipment is included with the Enhanced Charger
• M-RK Vehicular Charger 344A4616P2
• Remote Control Unit
• Mounting Bracket and Mounting Hardware 344A4616P11
(mounting hardware includes four machine screws, four lock
washers, six self-tapping screws and one cable tie)
• Power Cable 19B802554P2
• Power Cable 19B801358P2
TOOLS REQUIRED
1) Electric Drill
2) N0. 28 Drill Bit
3) Hole Saw
4) Phillips and Flat-Blade Screwdrivers
PLANNING THE INSTALLATION
The installation of the Vehicular Charger should be carefully planned,
before work actually begins.
Mechanical installation guidelines include mounting the unit:
• in a location that is safe for the operator and any passengers
in the vehicle.
• in a location that is convenient for the operator to use.
• in a location that allows proper clearance for cables.
• so that it can be easily removed for servicing.
It is recommended that the unit be installed by one of the many
Authorized Service Centers located throughout the United States.
Personnel at these centers are experienced in installations of this type of
equipment and can provide a safe, neat and functional installation.
To Next Page
Loading...