Ericsson R320S - Page 129

N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
Accessories 129
Placing the Phone in the Desktop Charger
Note! For further instructions on how to connect the desktop charger, please
contact your local Ericsson retailer.
To associate the desktop charger with a profile and a divert number
1. Place the phone in the desktop charger. The message
Choose profile? appears
in the display.
2. Press
YES. (If you press NO, the desktop charger will not be associated
with any profile).
3. Select a profile that you want to associate with the desktop charger, for
example the Home profile. Press
YES.
4. The message
Divert when connected to accessory? appears. Press YES.
This means that you want to divert your calls, for example, to your home
number, when you place the phone in the desktop charger.
(If you press
NO, your calls will not be diverted).
5. Enter a phone number including the area code (for example your home
number) and press
YES.
A number you used before may be suggested to you. Press
YES if you
want to choose that number, or enter another number.
6. The message
Automatic activation on? appears. Press YES.
The message
Profile: Home appears to confirm your choice.
You can also make these settings later, if you wish. In that case, you need to
add the desktop charger to the Home profile, or another profile. See “To add
an accessory to a profile” on page 134. You may set the divert number in the
1. Place the phone in the desktop
charger as shown in the picture
and press downwards to attach
the phone.
2. To detach the phone from the
charger, pull the phone towards
you and upwards.