Ericsson R320S - Page 130

N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
130 Accessories
Edit Profile submenu, where all profile settings are included ( Settings , YES,
Profiles, YES, Edit Profile , YES). See “Changing the Profile Settings” on page
126.
Note! The phone must be switched on and the automatic activation must be on
for the phone to switch profile automatically when connected to an accessory.
Tip! If you have several desktop chargers, each charger can be associated
with a specific profile or all chargers can be associated with the same profile.
When you connect a specific Ericsson Portable Handsfree to your phone,
the Port H-free profile is set automatically. This means that all profile settings
are set to the values specified for the Port H-free profile.See“TheProfile
Concept” on page 125.
Tip! If you do not want your phone to switch profile automatically when you
connect it to the Portable Handsfree, you need to turn the Auto activation off.
To do this, manually select the ‘Port H-free’ profile, and set the Auto
activation to off.
Using the Portable Handsfree
To answer an incoming call
• When the phone rings, press the button on your Portable Handsfree once.
Tip! You can also answer a call by using your voice. See “Voice Answering”
on page 114.
Toendacall
• Press the button on your Portable Handsfree once.
If the Call Waiting service is on, see “The Call Waiting Service” on page 83,
you can answer a second call by pressing the button on your Portable
Handsfree.
To answer a second call
1. Press the button on your Portable Handsfree once to answer the waiting
call. The current call is now put on hold.
2. WhenyoupressthebuttononyourPortable Handsfree again, the second
call is disconnected and the first call is retrieved automatically.
Portable Handsfree