Ericsson R320S - Page 68

N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
68 Sending and Receiving Fax, Data and E-mail
Receiving Fax and Data Calls – Single Numbering
If you have a SIM card that does not support separate fax and data numbers,
the phone does not recognize what kind of a call you are receiving.
Next Incoming Call Type
If you want to receive a fax or data call you have to set the phone to one of
these options in the Next Incoming sub-menu. You only see this menu if your
phone detects that you do not have separate numbers for data, fax and voice.
Once you have set your phone for a specific incoming call, it stays like this
until you change it. The normal setting is Voice.
Note! Depending on whether a call is ongoing or not, the menus ‘Call Info’
and ‘Ongoing Call’ replace each other. See “The Dynamic Call Info/Ongoing
Call Menu” on page 28 for more information.
To set the next incoming call type
1. Scroll to
Call Info , YES, Next Call , YES, Next Incoming , YES.
2. Select the call type you want (
Voice, Data or Fax ).
3. Press
YES to confirm your choice.
If you use fax class 1 and have problems faxing from one mobile phone to
another, it is probably due to long delays over the GSM network.
To change the fax class if you are using Microsoft® fax on Windows 95
1. Click Start and point to Settings. A sub-menu appears.
2. Click Control Panel.
3. Double-click the Mail and Fax icon (it may be called Mail).
4. In the dialog box that appears, select Microsoft fax.ClickProperties.
5. Select the Modem tab.
6. Select Ericsson R320.ClickProperties.
7. In the dialog box that appears, click Advanced.
8. Select the box Use class 2 if available.
9. Click OK.
10. Restart Microsoft fax for the changes to take effect.
If you want to use other fax programs or operating systems, please consult
your User’s Guides.
Changing the fax class