EasyManua.ls Logo

Ericsson RBS 2106 - Operational Conditions

Ericsson RBS 2106
487 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Short Message Service
RBS Actions:
Interpretation of SMS_BROADCAST_REQUEST messages
Transmission of SMSCB messages
Transmission of CBCH Fill-frame
Description
Configuration parameter CBCH Ind must be set to 1, to indicate the
usage of SDCCH sub-channel 2, for SMSCB messages.
Transmission of SMSCB messages on channel combination (vii)
requires that configuration parameter BS_AG_BLKS_RES is set to a
value greater than zero, /GSM:05.02:6.5.4/ /GSM:05.02:3.3.2.3/. The
function is initiated when the first (out of four)
SMS_BROADCAST_REQUEST message is received from the BSC.
Four SMS_BROADCAST_REQUEST messages together make a
complete SMSCB message. All four blocks must be available before
any transmission on the CBCH channel can take place.
Each SMS_BROADCAST_REQUEST message contains a complete
frame (including a Message type field = Layer 2 header) /GSM:04.12:3/
, to be transmitted on the CBCH channel.
The Message Type field contains a sequence number, used to check the
order of arrival. The correct order of arrival is defined as: 0.1,2,3.
The SMSCB messages are transmitted in four consecutive multiframes /
GSM:05.02:6.5.4/ during periods when TB = 0, 1, 2 and 3.
CBCH Fill-frames are transmitted on the CBCH channel when TB=0, 1,
2 and 3, and no SMSCB message is available for transmission. Nothing
is transmitted for TB = 4, 5, 6 and 7. TB = (FN DIV 51) MOD 8
(where FN = Frame Number).
A CBCH fill-frame consists of:
1 octet, Message Type /GSM:04.12:3.3.1/ with Sequence Number
= F (hex)
22 octets=2B (hex)
35.3 Operational Conditions
35.3.1 SMS MT/MO P-P
The maximum length of a message can be 140 octets or 160 SMS
characters.
35.3.2 SMS Cell Broadcast
The transmission time over the air interface for one SMSCB message (4
blocks, 23 octets each) is:
4 * 51 * 120/26 milliseconds = 0.941 seconds.
The maximum sending intensity is one message per 1.88 seconds (4
blocks of data and 4 empty frames).RBS provides storage capacity for
two complete SMSCB messages.
EN/LZT 720 0008 P2A
2001-11-28
303 (485)
© Ericsson Radio Systems AB
All Rights Reserved
Preliminary

Table of Contents

Other manuals for Ericsson RBS 2106

Related product manuals