EasyManua.ls Logo

Ericsson RBS 2106 - Operational Conditions

Ericsson RBS 2106
487 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Channel Distribution Function
The RBS searches for Remote OMT link establishment on PCM A
timeslot 23 whenever this timeslot is not used by other functions. The
timeslot is in use when it:
is configured in the IS (subchannels with bitrate other than 64
kbit/s, TN O&M timeslots, traffic functions)
carries the CF link
is scanned for the CF link
The remote OMT link will be disconnected if a new IS configuration
configures PCM A timeslot 23 for either:
traffic functions
subchannels with bitrate other than 64 kbit/s
The remote OMT link uses a protocol based on LAPD. The TEI value
used is 0 and the SAPI value used in the range 20 - 30.
56.4 Operational conditions
56.4.1 Operation and maintenance
Not applicable.
56.4.2 Capabilities
The maximum number of concentration groups is 12 and the
concentration ratios 1:1 to 12:1 (this is only valid for RBS).
The maximum scanning capacity is 24 channels per 1–second interval.
Each TRX handles two links, one OML- and one RSL-link on a
common terrestrial signalling channel.
The CMRU handles one OML link, normally on a signalling channel
shared with a TRX.
When multidrop is used only one PCM (PCM-A) path can be used for
communication towards the BSC.
A maximum of five RBSs can be connected in a linear cascade chain.
EN/LZT 720 0008 P2A
2001-11-28
445 (485)
© Ericsson Radio Systems AB
All Rights Reserved
Preliminary

Table of Contents

Other manuals for Ericsson RBS 2106

Related product manuals