BTS Parameter Limitations
L/R TI: 0 – 1
L/R SWI: 0 – 1
TRA: 0 – 1
PCM SYNC: 0 – 1
EXT SYNC: 0
IWD-defined value range: 0 – 1
LMT: 0
58.3.7 External Condition Map Class 2
BTS-supported value ranges:
RBS DOOR: 0 – 1
LAPD Q CG: 0
EXT SYNC: 0
PCM SYNC: 0 – 1
IWD-defined value range: 0 – 1
58.3.8 File Relation Indication
BTS-supported value ranges:
Other state: 0, 3
IWD-defined value range: 0 – 3
Note: There are limitations for specific combinations of current
state and other state.
58.3.9 FN Offset
FN (Frame Number) Offset must be equal for all TSs within a TRX.
Configuration of FN Offset on one TS will also reconfigure all
previously configured TSs on that TRX, provided that no TS within the
TRX is enabled.
BTS-supported value range:
FN offset: 0 – 1023 (03FF
(hex)
)
IWD-defined value range: 0 – 1325 (052D
(hex)
)
58.3.10 Frequency List
BTS-supported value range:
ARFCN, 900 MHz: 1 – 124
(dec)
(option 1)
0 – 124, 975 – 1023
(dec)
(option 2)
0 – 54, 955 – 1023
(dec)
(option 3)
EN/LZT 720 0008 P2A
2001-11-28
463 (485)
© Ericsson Radio Systems AB
— All Rights Reserved —
Preliminary
To Next Page
Loading...
