ERVOR G05 - C - 4 - Procedure for Starting

Page 22
Notice G05 - 3 590 503
Issue: 11/2011 - Rev.A
ERVOR (SCA) - 6, Rue Désiré Granet - Z.I. du Val d'Argent - 95100 ARGENTEUIL FRANCE
 (33) 01 34 11 50 00  (33) 01 34 11 50 10
Web : www.ervor.com - Email : info@ervor.com
8 - C - 4 - PROCEDURE FOR STARTING
Air compressor :
) Check the storage oil is drained and replaced by recommanded oil.
) Check oil level.
Coupling :
) Check distance between these two plates, blocking, and alinement.
) Check the protection coupling is correctly installed.
Driving :
Electric motor :
) Check the electrical motor protection by circuit breaker with appropriate adjustment.
) Check the sense of rotation.
Thermic engine :
) Check oil level and gasoline level.