ERVOR G05 - Technical Data

Page 5
Notice G05 - 3 590 503
Issue: 11/2011 - Rev.A
ERVOR (SCA) - 6, Rue Désiré Granet - Z.I. du Val d'Argent - 95100 ARGENTEUIL FRANCE
 (33) 01 34 11 50 00  (33) 01 34 11 50 10
Web : www.ervor.com - Email : info@ervor.com
1 - TECHNICAL DATA
- Reciprocating air compressor with lubricated stroke
- Nominal Flow at 30 bars (ANR) ..................................16,5 Nm
3
/H +/- 5%
- Nominal Flow at 40 bars (ANR) ..................................15,5 Nm
3
/H +/- 5%
- Maximum Output Pressure ......................................... 40 bar
- Service Pressure........................................................16 to 40 bar
- Revolution speed ....................................................... 1450 rpm
- Maximum Noise level at 1 metre ................................. 80 dB (A)
- Number of cylinders ................................................... 2 flat twin
- Number of stages....................................................... 2
- Low pressure cylinder bore......................................... 125 mm
- High pressure cylinder bore ........................................ 50 mm
- Piston stroke .............................................................. 25 mm
- Cooling coil ................................................................copper coil between stages
- Absorbed power .........................................................3,68 kW
- Maximum ambient temperature.................................... + 40°C (max.)
- Minimum ambient temperature .................................... - 10°C
- 2 horizontal, air-cooled cylinders
- Multi-Stage
- Revolution Speed Maximum: 1500 rpm
Minimum : 600 rpm
- Inter cooling by air
- Oil Splash Lubrifation
- Powered by electric motor or combustion engine (gasoline or diesel)
- Direct coupling with semi-elastic blades or indirect coupling by drive pulley and belts
- Weight with coupling : 52 Kg approximately