2.1. Type of device
The Multicooler refrigerator occurs only in the refrigerating version and is provided
with a specially prepared cooling monoblock consisting of:
refrigerating unit,
evaporator,
air supply ventilators.
This device is not intended for connection to external units.
The device is not intended for connection into sequences by twisting - only by adding further
modules.
2.2. Limitations
The cabinet is designed for storing and displaying goods as per information
included in section 2 of this manual. The use of this unit in non-compliance
with its use and user's manual is forbidden.
The manufacturer shall not be responsible for adverse events caused by misuse of the unit or
non-compliance with warnings included in this manual or failure to comply with given
specifications related to its application.
Entering the unit or climbing onto its upper part is forbidden. Stepping
onto any part of the unit is forbidden.
Special care shall be taken when handling glass elements in order to
avoid injury to fingers or any other parts of the body.
The cabinets are designed for indoor use only.
Ventilate the room if you suspect that the refrigerant may have leaked.
Storage of flammable and hazardous materials in the cabinet is strictly
forbidden.
Storage of explosives such as aerosol cans or flammable propellant cans
in this device is prohibited.
In case of devices equipped with inner cooling unit, when the non-detachable power lead is
damaged it should be replaced at the manufacturer's or at professional workshop or by a
qualified person to avoid any hazards.
The goods stored in these cases may not have temperatures exceeding the unit's operational
temperature.
To Next Page
Loading...