2.3. Packaging and transport
conditions
Transport of the unit to its final location, as far as possible, is recommended to be carried out
using the manufacturer's original packaging.
ATTENTION: Do not stack the cases one on top of the
other
Materials used for packagings are subject to recycling.
2.3.1. Lifting and transport lugs of the device
The device shall be lifted and handled as per the information enclosed with it and based on
the following diagram.
Diagrams showing fork-lift position during transport of the device. Information concerning
the weight of particular modules are contained in the table in chapter 2 of this manual.
To Next Page
Loading...